Carrozze d'epoca per activity
Moderatori: FNV, RobitailleFan, timetable57, Fireman, siss8MI, Manlio
Ho avuto modo di provare il rotabile con un consist. Le carozze nell'edtor non si agganciavano a causa del settaggio eng e wag. Infatti ho cambiato le righe:
SIMISA@@@@@@@@@@JINX0D0t______
Wagon ( FS_E623_602
Type ( Engine )
WagonShape ( FS_E623_602.s )
Size ( 3.34096m 4.52851m 20.4035m )
CentreOfGravity ( 0.0m 0.0m 0.0m )
Mass ( 70t )
WheelRadius ( 0.53m )
InertiaTensor ( Box ( 3.34096m 4.52851m 20.4035m ) )
Coupling (
Type ( Chain )
Spring (
Stiffness ( 1e7N/m 1e6N/m )
Damping ( 2e6N/m/s 2e6N/m/s)
r0 ( 10cm 20cm )
)
CouplingHasRigidConnection ( 1 )
)
Buffers (
Spring (
Stiffness ( 1e7N/m 0 )
Damping ( 1e6N/m/s 0 )
r0 ( 0m 1e9 )
)
Centre ( 0.5 )
Radius ( 1 )
Angle ( 0.5deg )
)
[b]Queste sono giuste ed ha funzionato. Le sostituite con quelle originali[/b]
[b]Immagine:[/b] 89,04 KB
SIMISA@@@@@@@@@@JINX0D0t______
Wagon ( FS_E623_602
Type ( Engine )
WagonShape ( FS_E623_602.s )
Size ( 3.34096m 4.52851m 20.4035m )
CentreOfGravity ( 0.0m 0.0m 0.0m )
Mass ( 70t )
WheelRadius ( 0.53m )
InertiaTensor ( Box ( 3.34096m 4.52851m 20.4035m ) )
Coupling (
Type ( Chain )
Spring (
Stiffness ( 1e7N/m 1e6N/m )
Damping ( 2e6N/m/s 2e6N/m/s)
r0 ( 10cm 20cm )
)
CouplingHasRigidConnection ( 1 )
)
Buffers (
Spring (
Stiffness ( 1e7N/m 0 )
Damping ( 1e6N/m/s 0 )
r0 ( 0m 1e9 )
)
Centre ( 0.5 )
Radius ( 1 )
Angle ( 0.5deg )
)
[b]Queste sono giuste ed ha funzionato. Le sostituite con quelle originali[/b]
[b]Immagine:[/b] 89,04 KB
Il marinaio spiegò le vele al vento,
ma il vento non capì
O' vero amico ò ricùnusce quando té rice e fesserie!
(Il vero amico lo riconosci quando ti dice le bugie)
Francesco
ma il vento non capì
O' vero amico ò ricùnusce quando té rice e fesserie!
(Il vero amico lo riconosci quando ti dice le bugie)
Francesco
Chi c’è in linea
Visitano il forum: Nessuno e 1 ospite